 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPN50 Series 50 WATT, Universal Input Fully Enclosed Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load INPUT SPECIFICATIONS Input Voltage...................................85 ~ 264VAC Input Frequency............................... 47 ~ 63Hz Input Current...............................0.55 ~ 1.0A Typ. Inrush Current 16A ~ 39A Typ OUTPUT SPECIFICATIONS FEATURES 50 WATT OUTPUT POWER UNIVERSAL INPUT OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION LIGHTWEIGHT CONSTRUCTION METAL CHASSIS WITH COVER COMPACT, LOW-PROFILE PACKAGES 3 YEAR WARRANTY Output Voltage ............................See Chart Voltage Adjustment.......................10% Minimum Load.............................10% Efficiency..........................................75 ~ 80% Over-Voltage Protection.................115 ~ 150% Manual Reset Over-Current Protection.................Automatic Recovery (105% min) Ripple and Noise.........................100mVp-p max. Hold-Up Time..................................40 ~ 50 mS Line/Load Regulation..................... See Chart Rise Time....................................800 ~ 1700 mS Leakage Current (100/230VAC).............0.75mA GENERAL SPECIFICATIONS MTBF.............................................>160,000 Hours Isolation Voltage Primary to Secondary...............3000VAC Primary to Case......................1500VAC Secondary to Case..................500VAC Isolation Resistance......................100 M-Ohms min. ENVIRONMENTAL SPECIFICATIONS Operating Temperature ...................0C ~ +60C Cooling..........................................Convection Temperature Coefficient................... 0.02% / C Humidity........................................20 ~ 85%Rh (non-condensing) Storage Temperature....................-20C ~ +85C Shock Vibration...........................Shock: 20G(3 Directions each 3 times) Vibration: 10 ~ 55Hz SAFETIES/APPROVALS FCC-B EN 55022-B VCCI-II PHYSICAL SPECIFICATIONS Metal Enclosed - Terminal Block 1 MODEL SPN50-05S SPN50-12S SPN50-15S SPN50-24S SPN50-48S Output Voltage 5VDC 12VDC 15VDC 24VDC 48VDC Output Current (85 ~ 264 VAC) 10A 4.2A 3.4A 2.1A 1.1A Efficiency (%) 75% 78% 79% 80% 80% Load Regulation (mV max) 10mV max 10mV max 10mV max 20mV max 40mV max Note: * * * * * Mounting screws not to exceed max penetration of 6mm Screw thread size is M3 (Metric) or 6/32nd (Inch) Weight 200g typ. Measurements in millimeter (mm) unless otherwise specified Tolerance 1mm NOTE: All specifications typical and nominal / full load and 25C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. 2 |
Price & Availability of SPN50-05S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |